Polish DINplus Pellets 6mm

SPECIFICATIONS
  • Moisture: 8% max
  • Ash max 0.7%
  • Diameter: 8 mm
  • Length: 30 mm
  • Weight 900 kg
  • Packaging: 15 kg plastic bags
  • DINplus

Polish DINplus Pellets 6mmMFP Construction Boards

Category:

Description

Polish DINplus Pellets 6mm

Premium wood pellets for heating and pellet stoves
The wood pellets are DINplus certified and assigned to quality class A1.

Polish DINplus Pellets 6mm, First-class organic fuel certified according to DINplus
Only dry sawdust, wood shavings and fine wood chips are used for the certified wood pellets.

High energy efficiency and environmentally friendly heating
The wood pellets have a high calorific value of 4.8 kWh/kg and burn particularly energy-efficiently with an ash content of less than 0.7%

– DINplus and FSC certified
– Diameter: 6mm ± 1mm
​​- Length: 3.15 < L ≤ 40mm
– humidity up to ≤ 10%
– low ash content approx. ≤ 0.7%
– Heat of combustion ≥ 16,500 MJ/kg
– Calorific value ≥ 4.6 kWh/kg

Polish DINplus Pellets 6mm, Wood pellets made of pure raw material without bark, binder or other additives with an ash melting point of 1,200 – 1,300° C, which ensures that minimal slag is formed. In addition, the pellets provide good, even and high heat.

When using wood pellets for heating, always look at the ash melting point; the lower the ash melting point, the more slag will form in your pellet stove. The auger and burner in the furnace can eventually be destroyed, as slag can become so hard that it cannot be removed.Polish DINplus Pellets 6mm

Is DINplus following exactly the EU standard?

The standard as well as DINplus include bulk density & fines as new parameters. The ash melting behavior is voluntary in the standard, but mandatory in DINplus. A high ash softening point is an essential quality criterion for pellets.

Important quality criteria of DINplus

Parameter (unit)          DINplus A1         DINplus A2

Length (mm)   3.15<L<40       1)        3.15<L<40       1)

Fines (%, mass)           ≤1              2) ≤1       2)

Ash content (%, mass)            ≤0.7            3) ≤1.2          3)

Ash melting temp. (°C)            ≥1200         4) ≥1100       4)

1) 1% of all pellets can be longer than 40mm, but max 45mm

2) Particles < 3.15mm, fines at the final point of delivery

3) Ash content at 550°C

4) Ash for determining the melting temperature is created at 815°C

Reviews

There are no reviews yet.

Be the first to review “Polish DINplus Pellets 6mm”

Your email address will not be published. Required fields are marked *

You cannot copy content of this page